Sony LF-B1 매뉴얼

26

You can change the wireless settings of the Base 
Station. If you change settings at this time, you 
will temporarily be unable to connect to the Base 
Station. After closing the Internet browser, reboot 
the Base Station, and then perform [Basic 
Settings] (

1 page 5) again to re-register your 

PSP™ system with the Base Station.

1

Wireless LAN devices that conform to the 
IEEE802.11a, b, or g standards can be used on 
the following channels. The PSP™ system 
can be used within the 2.4GHz channel.

2

An SSID is already entered here at the time of 
purchase (the characters shown on the side of 
the Base Station). If you want to change it, 
enter a string of up to 32 alphanumeric 
characters and symbols.
An SSID is an ID that identifies a wireless 
network.

3

[WEP] and [WPA-PSK with TKIP] are 
encryption methods. Select one or the other, 
and enter an encryption key or a pre-shared 
key.

For the encryption key, enter a string of 
characters or a string of hexadecimal 
numbers. 
You can use any string of characters as the 
key, but the number of required characters 
differs depending on the length of the key. The 
following table shows the number of required 
characters and the type of characters that can 
be used in encryption keys.

Enter a pre-shared key from 8 to 64 characters 
in length. When you enter 64 characters, the 
available characters are limited to 0 to 9, A to 
F, and a to f.

z 

For details on WEP and WPA-PSK with TKIP, 
refer to "About Wireless Security" in the 
Important Safeguards document supplied with 
the Base Station.

4

Select this to confirm and save the 
information you have entered.

• When choosing encryption keys and pre-shared 

keys, you should avoid words and phrases that are 
easy for other people to guess.

• For better security, you should change your 

encryption key or pre-shared key periodically.

z 

• You will need the SSID, and the encryption key or 

pre-shared key, when you connect your PSP™ 
system or computer to the Base Station over a 
wireless connection. Keep a record of the 
information you enter.

Character 
input

5 characters
(alphanumeric, 
symbols)

13 characters
(alphanumeric, 
symbols)

Hexadecimal 
input

10 characters
(0 to 9, A to F, 
a to f)

26 characters
(0 to 9, A to F, 
a to f)

Character input

8 to 63 characters
(alphanumeric, symbols) 

Hexadecimal input

64 characters
(0 to 9, A to F, a to f)