Sony KV-36HS20 사용자 가이드

The remote control is preset to operate Sony brand video equipment.

If you have video equipment other than Sony brand that you want to 
control with the TV’s remote control, use the following procedures to 
program the remote control. 

From the “Manufacturer’s Codes” listed on page 52, select the three-
digit code number for the manufacturer’s code for your equipment. If 
more than one code number is listed, start with the number listed 
first. Use the code number to complete the following procedure.

Move the slide switch to the desired equipment type.

Press CODE SET.

Press the white function button for the type of equipment you 
want to control with the TV’s remote control (VCR/DVD or 
SAT/CABLE).

Enter the three-digit manufacturer’s code number.

Press ENTER.

To check if the code number works, aim the TV’s remote control 
at the equipment and press the green POWER button that 
corresponds with that equipment. If it responds, you are done. If 
not, try using the other codes listed for that manufacturer.

Beta, ED Beta VCRs

AV1 

303

8 mm VCR

AV2 

302

VHS VCR

AV3 

301

DVD Player

DVD

751

✍

The equipment must have infrared (IR) remote capability in order to be used 
with the remote control.

✍

You must perform step 3 within 10 seconds of step 2, or you must start 
again from step 2.

2

4

3

1

5