Sony KV-36HS420 작동 가이드
21
SETU
P
Set
up
S
E
TU
P
P
SETU
P
S
E
TU
P
P
SETU
P
Satellite Receiver
To connect a satellite receiver
1
Connect the satellite antenna cable to the satellite receiver’s
satellite input jack.
satellite input jack.
2
Use an A/V cable to connect the satellite receiver’s A/V output
jacks to the TV’s A/V input jacks.
jacks to the TV’s A/V input jacks.
3
Connect a CATV cable from your cable or antenna to the satellite
receiver’s VHF/UHF input jack.
receiver’s VHF/UHF input jack.
4
Use a coaxial cable to connect the satellite receiver’s VHF/UHF
output jack to the TV’s VHF/UHF input jack.
output jack to the TV’s VHF/UHF input jack.
5
Run the satellite receiver’s setup program (see the satellite
receiver’s manual for details).
receiver’s manual for details).
Notes on Using This Connection
To Do This ...
Do This ...
Watch the satellite receiver
Press
TV/VIDEO
repeatedly to select the satellite receiver input
(VIDEO 1 in the illustration).
Set up the TV remote control to operate the
satellite receiver
satellite receiver
If you have a non-Sony satellite receiver, you must program
the remote control. See “Programming the Remote Control”
on pages 37-38.
the remote control. See “Programming the Remote Control”
on pages 37-38.
Activate the TV remote control to operate
the satellite receiver
the satellite receiver
Press
SAT/CABLE FUNCTION
.
Control satellite receiver functions with the
TV remote control
TV remote control
Label video inputs to easily identify
equipment connected to the TV
equipment connected to the TV
Satellite antenna
cable
cable
A/V cable
CATV cable
TV
Satellite receiver
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
white to white, etc.
Coaxial
cable
cable
HS420.book Page 21 Monday, April 12, 2004 7:13 PM