Sony STR-DE698/B 매뉴얼
masterpage:Left
lename[D:\Sony SEM ju\DATA_STR-
DE698_Revision3\J9050212_2560571131DE698_UCA\2560571131\GB03CON_STR-DE698-
UCA.fm]
UCA.fm]
model name1[STR-DE698]
[2-560-571-13(1)]
18
GB
Performing initial setup
operations
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
1
Press
?/1
to turn off the receiver.
2
Hold down
?/1
for 5 seconds.
“PUSH” and “ENTER” appears in the
display alternatingly.
display alternatingly.
3
Press ENTER.
“CLEARING” appears in the display for a
while, then “CLEARED” appears.
while, then “CLEARED” appears.
The following are reset to their factory
settings.
settings.
• All settings in the SET UP, LEVEL, EQ
and CUSTOMIZE menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME –/+ is set to “VOL
MIN”.
• Input is set to DVD.
You can use the SET UP menu to set the size,
distance and location of the speakers connected
to this receiver.
distance and location of the speakers connected
to this receiver.
1
Press
?/1
to turn on the receiver.
2
Press MAIN MENU repeatedly to select
“
“
SET UP
”.
3
Press
or
repeatedly to select the
parameter you want to adjust.
Note
Some speaker setup items may appear dimmed in
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
4
Turn the –/+ jog dial to select the
setting you want.
setting you want.
The setting is entered automatically.
Note
Press ENTER on the receiver if you select the
setting for “SP. PAT. X –X”.
setting for “SP. PAT. X –X”.
5
Speaker setup parameters
The initial settings are underlined.
x
XXXX SET (Speaker easy setup)
• EASY
If you want to set up your speakers
automatically, select “EASY SET”. You can
select a pre-defined speaker pattern (see the
supplied “Easy Setup Guide”).
automatically, select “EASY SET”. You can
select a pre-defined speaker pattern (see the
supplied “Easy Setup Guide”).
• NORM
If you want to adjust the settings of each
speaker manually, select “NORM SET”.
speaker manually, select “NORM SET”.
5: Setting up the speakers
GB01COV_STR-DE698-UCA.book Page 18 Wednesday, February 23, 2005 10:14 AM