Sony STR-K670P 작동 가이드
masterpage:Left
lename[E:\SEM_Janet\Revision
Data\J9050000_2342216141DDW670_GB\2342216141\GB06ADV_HT-DDW670-U.fm]
30
GB
model name1[HT-DDW670]
[2-342-216-14(1)]
You can adjust the tonal quality (bass, treble
level) of the front speakers using the TONE
menu.
level) of the front speakers using the TONE
menu.
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
multi channel surround effects (DVD,
etc.).
2
Press MAIN MENU repeatedly to select
“
“
TONE
”.
3
Press
or
repeatedly to select the
parameter you want to adjust.
For details, see “TONE menu parameters”
below.
below.
4
While monitoring the sound, press + or
– repeatedly to select the setting you
want.
– repeatedly to select the setting you
want.
The setting is entered automatically.
5
Note
You cannot adjust the tone when the receiver is
decoding signals with a sampling frequency of more
than 48 kHz.
decoding signals with a sampling frequency of more
than 48 kHz.
TONE menu parameters
x BASS XX dB
(Front speaker bass level)
x TREB. XX dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from –6 dB to +6 dB in 1 dB steps.
Using the CUSTOMIZE menu
to adjust the receiver
to adjust the receiver
You can adjust various receiver settings using
the CUSTOMIZE menu.
the CUSTOMIZE menu.
1
Press MAIN MENU repeatedly to select
“
“
CUSTOM
”.
2
Press
or
repeatedly to select the
parameter you want to adjust.
For details, see “CUSTOMIZE menu
parameters” below.
parameters” below.
3
Press + or – repeatedly to select the
setting you want.
setting you want.
The setting is entered automatically.
4
CUSTOMIZE menu parameters
The initial settings are underlined.
x A.V.SYNC. X
(Time alignment)
• Y (Yes) (delay time : 68 ms)
The audio output is delayed so that the time gap
between the audio output and visual display is
minimized.
between the audio output and visual display is
minimized.
• N (No) (delay time : 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or Plasma monitor or projection TV.
• This parameter is only valid when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter is not valid when PCM 96 kHz or
DTS 2048 signals are input.
Adjusting the tone
Advanced settings
GB01COV_HT-DDW670-U.book Page 30 Wednesday, July 13, 2005 1:45 PM