Sony CDXGT540UI 매뉴얼
17
Operating an iPod directly
— Passenger control
— Passenger control
You can operate an iPod connected to the dock
connector directly.
connector directly.
1
During playback, press and hold
(MODE).
“MODE IPOD” appears and you will be able
to operate the iPod directly.
(MODE).
“MODE IPOD” appears and you will be able
to operate the iPod directly.
To change the display item
Press (DSPL).
The display items change as follows:
Track name
Press (DSPL).
The display items change as follows:
Track name
t Artist name t Album name t
MODE IPOD
t Clock
To exit the passenger control
Press and hold (MODE).
Then “MODE AUDIO” will appear and the play
mode will change to “RESUMING.”
Press and hold (MODE).
Then “MODE AUDIO” will appear and the play
mode will change to “RESUMING.”
Notes
• The volume can be adjusted only by the unit.
• If this mode is canceled, the repeat setting will be
• The volume can be adjusted only by the unit.
• If this mode is canceled, the repeat setting will be
turned off.
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
1
Press the select button repeatedly
until the desired item appears.
until the desired item appears.
2
Rotate the control dial to adjust the
selected item.
selected item.
3
Press
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
reference for details):
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
LOW*
1
, MID*
1
, HI*
1
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
right speakers.
FAD (Fader)
Adjusts the relative level between the front and
rear speakers.
rear speakers.
SUB*
2
(Subwoofer volume)
Adjusts the subwoofer volume.
AUX*
3
(AUX level)
Adjusts the volume level for each connected
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
*1 When EQ3 is activated.
*2 When the audio output is set to “SUB-OUT”
*2 When the audio output is set to “SUB-OUT”
(page 18).
“ATT” is displayed at the lowest setting, and can be
adjusted up to 21 steps.
“ATT” is displayed at the lowest setting, and can be
adjusted up to 21 steps.
*3 When AUX source is activated (page 19).