Sony Dcr-hc96 매뉴얼

E:\SONY\2659813111\01US09ADD.fm

DCR-HC36/HC46/HC96

2-659-813-11(1)

• The video heads will wear after long use. If you 

cannot obtain a clear image even after using a 
cleaning cassette (optional), it might be because 
the video heads are worn. Please contact your 
Sony dealer or local authorized Sony service 
facility to have the video heads replaced.

• Do not exert excessive pressure on the LCD 

screen, as it may cause damage.

• If your camcorder is used in a cold place, a 

residual image may appear on the LCD screen. 
This is not a malfunction.

• While using your camcorder, the back of the 

LCD screen may heat up. This is not a 
malfunction.

x

If fingerprints or dust make the LCD screen 
dirty, it is recommended you use a soft 
cloth to clean it. When you use the LCD 
Cleaning Kit (optional), do not apply the 
cleaning liquid directly to the LCD screen. 
Use cleaning paper moistened with the 
liquid.

x

(CALIBRATION)
The buttons on the touch panel may not 
work correctly. If this happens, follow the 
procedure below. It is recommended you 
connect your camcorder or the Handycam 
Station (supplied with DCR-HC46/HC96) 
to the wall outlet using the supplied AC 
Adaptor during the operation.

1

Slide the POWER switch repeatedly to turn 
on the PLAY/EDIT lamp.

2

Disconnect cables other than that of the AC 
Adaptor from your camcorder or the 
Handycam Station (supplied with DCR-
HC46/HC96), then eject the cassette and 
“Memory Stick Duo” from your 
camcorder.

3

Touch  

t [MENU] t 

 

(STANDARD SET) 

t [CALIBRATION] 

t 

.

• For DCR-HC46/HC96:

The screen changes to 16:9 ratio when using 
4:3 ratio.

4

Touch the “×” displayed on the screen with 
the corner of the “Memory Stick Duo” or 
the like.
The position of the “×” changes.

To cancel [CALIBRATION], touch 
[CANCEL] in step 4.

If you did not press the right spot, start from 
step 

4

 again.

• You cannot calibrate the LCD screen if it is 

rotated.

• If the casing is soiled, clean the camcorder body 

with a soft cloth lightly moistened with water, 
and then wipe the casing with a dry soft cloth.

• Avoid the following to avoid damage to the 

finish.
– Using chemicals such as thinner, benzine, 

alcohol, chemical cloths, repellent, insecticide 
and sunscreen.

– Handling with above substances on your 

hands.

– Leaving the casing in contact with rubber or 

vinyl objects for a long period of time.

• Wipe the surface of the lens clean with a soft 

cloth in the following instances:
– When there are fingerprints on the lens 

surface.

– In hot or humid locations
– When the lens is exposed to salty air such as 

at the seaside.

• Store in a well-ventilated location subject to 

little dirt or dust.

• To prevent mold, periodically clean the lens as 

described above. It is recommended that you 
operate your camcorder about once a month to 
keep it in optimum state for a long time.

CALIBRATION

Touch  the  "x"

1/3

CANCEL