Sony PCGC1VP 매뉴얼

❑

If the disc requires software, make sure the software is installed according to 
the manufacturer’s instructions.

❑

A dirty or damaged disc may cause the notebook to stop responding while it 
tries to read the disc. If necessary, restart the notebook, remove the disc, and 
then check it for dirt or damage.

❑

If you see video but can not hear audio, check all of the following:

❑

Check that your DVD-ROM drive does not have the mute setting 
enabled.

❑

Check the volume setting in the audio mixer. 

❑

If you are using external speakers, check the volume settings, and then 
check the connections between your external speakers and the 
notebook. 

❑

Click Start, point to Control Panel , System, Device Manager. Check 
that the correct drivers are installed properly.

❑

Do not use adhesive labels to identify the CD. The label may come off while 
the disc is in use in the optical drive and cause the drive to malfunction.

❑

If a region code warning appears when you try to use your DVD-ROM drive, 
it may be that the DVD you are trying to play is incompatible with the 
DVD-ROM drive. Check the region code listing on the DVD packaging.

❑

Moisture condensation may have occurred. Leave the computer idle for at 
least 1 hour with the power turned on.

❑

Make sure the computer is turned on.

❑

Press the Eject button on the optical drive.

❑

If the Eject button does not work, you can open the tray by inserting a long, 
thin object (such as a straightened paper clip) into the hole to the right of the 
Eject button.

❑

Check that the DV device is turned on and that the cables are properly 
connected.

❑

Disconnect the i.LINK cable and connect it again.