D-Link DFL-1600 참조 가이드
Default Severity
Log Message
FTPALG: Failed to create connection(1). Connection: <connection>.
String=<string>
String=<string>
Explanation
An error occured when creating a data connection from the server to
client. This could possibly be a result of lack of memory.
client. This could possibly be a result of lack of memory.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
peer
connection
string
connection
string
Context Parameters
2.1.81. illegal_command (ID: 00200219)
Default Severity
Log Message
FTPALG: SITE EXEC from <peer> not allowed, rejecting command
Explanation
The client tried to issue a "SITE EXEC" command, which is not valid
since the client is not allowed to do this. The command will be
rejected.
since the client is not allowed to do this. The command will be
rejected.
Gateway Action
rejecting_command
Recommended Action
If the client should be allowed to do issue "SITE EXEC" commands,
modify the FTPALG configuration.
modify the FTPALG configuration.
Revision
1
Parameters
peer
Context Parameters
2.1.82. illegal_direction1 (ID: 00200220)
Default Severity
Log Message
FTPALG: Illegal direction for command(1), peer=<peer>. Closing
connection.
connection.
Explanation
A command was sent in an invalid direction, and the connection will
be closed.
be closed.
Gateway Action
close
Recommended Action
None.
2.1.81. illegal_command (ID:
00200219)
00200219)
Chapter 2. Log Message Reference
68