D-Link DAS-3216 사용자 설명서

 
 

                                                                 

 

35 

2. Configure the name of line profile, say SERVICE512K64K. 

3. Configure the line profile on CO side (Down Stream). For example,       

Configure the line type, transmit rate adaptation, target SNR margin, minimum 
transmit rate, maximum transmit rate, and interleave delay as Interleaved, 
AdaptAtStartup, 6 db, 32Kbps, 1024 Kbps, and 16 milli-seconds.   

4. Configure the line profile on RT side (Up Stream). For example,   

Configure the line type, transmit rate adaptation, target SNR margin, minimum 
transmit rate, maximum transmit rate, and interleave delay as Interleaved, 
AdaptAtStartup, 6 db, 32 Kbps, 1024 Kbps, and 16 milliseconds. 

5. Click on the Apply button to submit your changes, or click on the Cancel 
button if you want to clear all the values you have configured. 

Note: (1) If you configure “Transmit Rate Adaptation” as “Fixed”, it is 

recommended to configure the value of “minimum transmit rate” and 
“maximum transmit rate” on CO side or RT side the same. However, 
the value of CO side and RT side may not be the same. 

            (2) Line profile can be created maximum up to 10 profiles. 

 

Creating a Alarm Profile    {Create Alarm Profile} 

This section describes how to create an ADSL alarm profile. 

1. Click on “Create Alarm Profile” of DSL Profile configuration Menu. 

The Create Alarm Profile screen appears as follows: