D-Link DFE-538TX 사용자 설명서
23
Note: Repeat this step for each computer that will be added to this network. Make
sure that the IP address is unique for each computer. The first computer is
computer A and uses the IP address of 192.168.0.5 with Subnet mask of
255.255.255.0. The last number in Computer B's address will be different. No two
devices on the network can have the same IP address.
sure that the IP address is unique for each computer. The first computer is
computer A and uses the IP address of 192.168.0.5 with Subnet mask of
255.255.255.0. The last number in Computer B's address will be different. No two
devices on the network can have the same IP address.
6. Assign a different IP Address to computer B: 192.168.0.10 (the last number
changed from number 5 to number 10. It is recommended that you begin
numbering your computers by changing the last digit from 5 to 10 for computer
B. The Subnet mask will always be the same as computer A with
255.255.255.0.
numbering your computers by changing the last digit from 5 to 10 for computer
B. The Subnet mask will always be the same as computer A with
255.255.255.0.
7. After entering the IP address and Subnet mask, click OK and close the “TCP/IP
Properties” Box.
Note: Windows 2000 does not have to reboot to activate the changes in IP
addresses. However, it is always a good idea to reboot after making changes to
Network Settings.
addresses. However, it is always a good idea to reboot after making changes to
Network Settings.