KitchenAid 30-Inch 5-Element Electric Convection Range 사용 및 관리

Use AquaLift

®

 Technology regularly to clean oven spills.

Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.
Cleaning Method:

■

Clean cycle:

 

See “Clean Cycle” first.

Oven Light

The oven light is a standard 40-watt appliance bulb. Before 
replacing, make sure the oven and cooktop are cool and the 
control knobs are in the Off position.

1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb by turning clockwise.
5. Replace bulb cover by turning clockwise.
6. Plug in range or reconnect power.

PROBLEM SOLVER

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer 
to the warranty page in this manual and scan the code there with your mobile device, or visit http://kitchenaid.custhelp.com.

Contact us by mail with any questions or concerns at the address below:

In the U.S.A.:

KitchenAid

 Brand Home Appliances

 

Customer eXperience Center

 

553 Benson Road

 

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Power supply cord is unplugged - Plug into a grounded outlet.

Energy Save is active, and the display is blank - Press any key on the control to display the time of 
day. See the “Electronic Oven Controls” section for more information.

Household fuse is blown, or a circuit breaker is tripped - Replace the fuse or reset the circuit breaker. 
If the problem continues, call an electrician.

The control displays an F9 or F9 E0 error code - The electrical outlet in the home may be miswired. 
Contact a qualified electrician to verify the electrical supply.

The control knob is not set correctly - Push in knob before turning to a setting.

On ceramic glass models, the oven control lockout is set - See the “Control Lock” keypad feature in 
the “Feature Guide” section.

Cookware is not the proper size - Use cookware about the same size as the surface cooking area, 
element or surface burner. Cookware should not extend more than 

¹⁄₂

" (1.3 cm) outside the cooking area.

Control knob set to incorrect heat level - See the “Cooktop Use” section.

Range is not level - Level the range. See the Installation Instructions.

Element cycling due to a temperature limiter - This is normal operation. The element may cycle on 
and off to keep the cooktop from overheating.

Delay Start is set - See the “Cook Time” section.

Control Lock is on - Press and hold the “0” key for 3 seconds to unlock.

Control is in Demo Mode - See the “Electronic Oven Controls” section. Demo Mode is used for display 
models in a showroom.

Electronic oven control set incorrectly - See the “Electronic Oven Controls” section.

Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic Oven 
Controls” section.

Power to range is turned on or restored - See “Control Display” in the “Electronic Oven Controls” 
section. If the indicator lights keep flashing, call for service. See the “Warranty” section for contact 
information.

Power failure (display shows flashing time) - Press OFF to clear the display. On some models, reset 
the clock, if needed. See the “Clock” keypad feature in the “Feature Guide” section.

Error code (display shows letter followed by number) - Depending on your model, press OFF to clear 
the display. See “Control Display” in the “Electronic Oven Controls” section. If it reappears, call for 
service. See the “Warranty” section for contact information.