Nikon D7200 사용자 가이드

119

Reduce flicker and banding when shooting under fluorescent or 
mercury-vapor lighting during live view. Choose Auto to allow 
the camera to automatically choose the correct frequency, or 
manually match the frequency to that of the local AC power 
supply.

D

Dust off reference data recorded before image sensor cleaning is 
performed can not be used with photographs taken after image 
sensor cleaning is performed. Select Clean sensor and then start 
only if the dust off reference data will not be used with existing 
photographs.

D

The same reference data can be used for 
photographs taken with different lenses or 
at different apertures. Reference images can 
not be viewed using computer imaging 
software. A grid pattern is displayed when 
reference images are viewed on the camera.

G button

➜ B setup menu

A

If Auto fails to produce the desired results and you are unsure as to the 
frequency of the local power supply, test both the 50 and 60 Hz 
options and choose the one that produces the best results. Flicker 
reduction may not produce the desired results if the subject is very 
bright, in which case you should try choosing a smaller aperture 
(higher f-number).