Nikon D5300 참조 매뉴얼

237

* A wireless remote controller can not be attached at the same time as an ME-1 stereo 

microphone. Attempting to forcibly attach accessories can damage the camera or 
accessory.

: The body cap keeps the mirror, viewfinder screen, 

and image sensor free of dust when a lens is not in place.

• Wireless Remote Control ML-L3 (

0 70): The ML-L3 uses a 3 V CR2025 battery.

Pressing the battery-chamber latch to the right (q), insert a fingernail into the 
gap and open the battery chamber (w). Ensure that the battery is inserted in 
the correct orientation (r).

: When a WR-R10 wireless remote 

controller is attached, the camera can be controlled wirelessly using a WR-T10 
wireless remote controller (

0 71, 203). The WR-T10 uses a 3 V CR2032 battery.

Insert a fingernail into the gap behind the battery-chamber latch and open the 
battery chamber (q). Ensure that the battery is inserted in the correct 
orientation (e).

• Wireless Remote Controller WR-1 (

0 71, 203): WR-1 units are used in groups of two 

or more, with one functioning as a transmitter and the remaining units acting 
as receivers. The receivers are attached to the accessory terminals of one or 
more cameras, allowing the transmitter to be used to release the camera 
shutters.

(

The D5300 is equipped with an accessory terminal for 
WR-1

 and  WR-R10 wireless remote controllers (

0 71), MC-DC2 

0 88), and GP-1/GP-1A GPS units (0 81), 

which connect with the 

4 mark on the connector 

aligned with the 

2 next to the accessory terminal 

(close the connector cover when the terminal is not in 
use).

• UC-E17 and UC-E6 USB cables (

0 153, 156): The supplied UC-E17 cable is not 

available for separate purchase; purchase UC-E6 cables instead.

A

Availability may vary with country or region. See our website or brochures for the latest 
information.