Nikon COOLPIX L29 사용자 설명서

Open the battery-chamber/memory 
card slot cover.

•  Hold the camera upside down to prevent the batteries from 

falling out.

Insert the batteries and 
memory card.

•  Confirm that the positive (+) and 

negative (–) battery terminals are 
oriented correctly and insert the 
batteries.

•  Confirm the correct orientation 

and slide the memory card in until 
it clicks into place.

Memory card slot

Close the battery-chamber/memory 
card slot cover.

•  Two LR6/L40 (AA-size) alkaline batteries (included batteries)

•  Two FR6/L91 (AA-size) lithium batteries

•  Two EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries

Turn the camera off and make sure that the power-on lamp 
and the monitor have turned off, and then open the battery-
chamber/memory card slot cover.

•  Gently push the memory card into the camera (1) to 

partially eject the card (2).

•  The camera, batteries, and memory card may be hot 

immediately after using the camera.

Press the power switch to turn on the 
camera.

•  The monitor turns on when the camera is turned on.

•  To turn the camera off, press the power switch again.

Use the multi selector 
HI

 to select the desired 

language and press the 
k

 button.

Cancel

Language

Use HI to select Yes and press the 
k

 button.

Yes

No

Choose time zone and
set date and time?

Time zone and date

Cancel

Use JK to select your 
home time zone and press 
the k button.

•  Press H to turn on daylight saving 

time (W is displayed above the 
map). 
Press I to turn it off.

Back

L o n d o n
C a s a b l a n c a

Use HI to select the date format and press the k button.

Set the date and time, and press the 
k

 button.

•  Use JK to select a field and then use HI to set 

the date and time.

•  Select the minute field and press the k button to 

confirm the setting.

Date and time

D

M

Y

01

01

2014

00

00

Edit

When the confirmation screen is displayed, use HI to 
select Yes and press the k button.

Press the A (shooting mode) button.

Press this button in 
shooting mode for 
shooting-mode 
selection menu.

Use HI to select Easy auto mode 
and press the k button.

Easy auto mode

•  The camera enters the shooting 

mode and you can take images in 
Easy auto mode.

•  While shooting, you can check 

the battery level indicator and the 
number of exposures remaining.

1900

15m 0s

Shooting screen

Number of exposures 

remaining

Battery level indicator

Shooting 

mode icon

Hold the camera steady.

•  Keep fingers and other objects away from the lens, 

flash, microphone, and speaker.

Frame the picture.

•  Move the zoom control to change the zoom 

position.

•  When the camera automatically determines the 

scene mode, the shooting mode icon changes.

Zoom out

Zoom in

Press the shutter-release button 
halfway.

•  When the subject is in focus, the focus area glows 

green.

•  If the focus area or focus indicator flashes, the 

camera is unable to focus. Modify the composition 
and try pressing the shutter-release button halfway 
again.

F3.2

1/250

Focus area

Without lifting your finger, press the shutter-
release button the rest of the way down.

•  The indicator showing the number of exposures remaining or the 

indicator showing the maximum movie length flashes while images 
are being saved or while a movie is being recorded. Do not open the 

or memory card while an indicator is flashing. Doing this could 
result in loss of data, or in damage to the camera or the memory 
card.

Press the c (playback) button to enter 
playback mode.

Use the multi selector HIJK to 
select an image to display.

•  To return to shooting mode, press the A button.

4/      4

15/05/2014  15:30
0004. JPG

Full-frame Playback

•  Move the zoom control toward 

g

 (i) in full-frame playback mode to 

zoom in on the image.

•  Move the zoom control toward 

f

 (h) in full-frame playback mode 

to display a list of images called 
“thumbnails.”

1/    20

Press the l (delete) button to delete 
the image currently displayed in the 
monitor.

Use the multi selector HI to 
select Current image and press the 
k

 button.

•  To exit without deleting, press the d button.

Current image

All images

Erase selected images

Delete

Select Yes and press the k button.

•  Deleted images cannot be recovered.

Yes

No

Erase 1 image?

Display the shooting screen.

•  Check the remaining amount of movie recording 

time.

Movie recording time 

remaining

1900

15m 0s

Press the b (e movie-record) button 
to start movie recording.

7m30s

Press the b (e movie-record) button again to stop 
recording.

Select a movie in full-frame playback 
mode and press the k button.

•  Movies are indicated by the movie options icon.

10s

15/05/2014  15:30
0010. AVI

Movie options

The following shooting modes are available.

•  G Easy auto mode

The camera automatically selects the optimum scene mode when you frame an image, 
making it even easier to take images using settings that suit the scene.

•  b Scene mode

Camera settings are optimized according to the scene that you select.

•  F Smart portrait

When the camera detects a smiling face, you can take an image automatically without 
pressing the shutter-release button (smile timer).
You can also use the skin softening option to smooth the skin tones of human faces.

•  A Auto mode

Used for general shooting.
Settings can be adjusted to suit the shooting conditions and the type of shot you want 
to capture.

Press the A (shooting mode) button in 
the shooting screen.

Use the multi selector HI to select 
a shooting mode and press the 
k

 button.

Easy auto mode

You can use the multi selector to set frequently used functions such as the flash and 
self-timer.
You can set the following functions using HIJK in the shooting screen.

Flash mode

Macro mode

Self-timer

Exposure compensation

•  X Flash mode

You can select the flash mode to match the shooting conditions.

•  n Self-timer

If you select ON, the camera releases the shutter 10 seconds after you press the shutter-
release button.

•  p Macro mode

Use macro mode when taking close-up images.

•  o Exposure compensation

You can adjust overall image brightness.

The functions that are available vary with the shooting mode.

Use the multi selector and k button to navigate the menus.
The following menus are available.

•  A Shooting menu

Available by pressing the d button in the shooting screen.
Allows you to change image size and quality, continuous shooting settings, etc.

•  c Playback menu

Available by pressing the d button when viewing images in full-frame playback 
mode or thumbnail playback mode. Allows you to edit images, play slide shows, etc.

•  D Movie menu

Available by pressing the d button in the shooting screen.
Allows you to change movie recording settings.

•  z Setup menu

Allows you to adjust basic camera functions such as date and time, display language, 
etc.

Press the d (menu) button.

•  The menu is displayed.

Press the multi selector J.

•  The current tab is displayed in yellow.

Image mode
White balance
Continuous

Shooting menu

Color options

Tab

Use HI to select the desired tab.

•  The menu is changed.

Set up

Welcome screen
Time zone and date
Monitor settings
Print date

Sound settings
Auto off

Motion detection

Press the k button.

•  The menu options become selectable.

Set up

Welcome screen

Time zone and date
Monitor settings
Print date

Sound settings

Motion detection

Auto off 

Use HI to select a menu option, and 
then press the k button.

•  The settings for the option you selected are 

displayed.

Print date

Off

Date and time

Date

Use HI to select the setting, and then 
press the k button. 

•  The setting you selected is applied.

•  When you are finished using the menu, press the 

d

 button.

Print date

Date

Date and time

Off

•  Certain menu options cannot be set depending on the current shooting mode or the 

state of the camera.

•  When a menu is displayed, you can switch to shooting mode by pressing the 

A

 (shooting mode) button or b (e movie-record) button.

Install ViewNX 2 to upload, view, edit, and share photos and movies.

An Internet connection is required.
For system requirements and other information, see the Nikon website for your region.

Download the ViewNX 2 installer.

Start the computer and download the installer from:
http://nikonimglib.com/nvnx/

Double-click the downloaded file.

Follow the on-screen instructions.

Exit the installer.

Click Yes (Windows) or OK (Mac).

Choose how images will be copied to the computer.

Choose one of the following methods:

•  SD card slot: If your computer is equipped with an SD card slot, the card can be 

inserted directly in the slot.

•  SD card reader: Connect a card reader (available separately from third-party 

suppliers) to the computer and insert the memory card.

•  Direct USB connection: Turn the camera off and ensure that the memory card 

is inserted in the camera. Connect the camera to the computer using the USB 
cable. Turn the camera on.

Transfer images to the computer.

•  Click Start Transfer.

•  At default settings, all the images on the memory card will be copied to the 

computer.

Terminate the connection.

•  If you are using a card reader or card slot, choose the appropriate option in the 

computer operating system to eject the removable disk corresponding to the 
memory card, and then remove the card from the card reader or card slot. If the 
camera is connected to the computer, turn the camera off and disconnect the 
USB cable.

If the camera fails to function as expected, check the list of common problems below 
before consulting your retailer or Nikon-authorized service representative.

The camera is on but does not respond.
Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and reinsert the battery or batteries or, if you are 
using an AC adapter, disconnect and reconnect the AC adapter. Note that although any 
data currently being recorded will be lost, data that have already been recorded will not 
be affected by removing or disconnecting the power source.

•  The camera automatically turns off to save power (auto off function).

•  The camera or batteries have become too cold and cannot operate properly.

•  The inside of the camera has become hot. Leave the camera off until the inside of the 

camera has cooled, and then try turning it on again.

•  The camera is off.

•  The batteries are exhausted.

•  The camera has entered standby mode to save power. Press the power switch, shutter-

release button, A button, c button, or b (e movie-record) button.

Camera becomes hot.
The camera may become hot when used for an extended period of time to shoot movies 
or send images using an Eye-Fi card, or when used in a hot environment; this is not a 
malfunction.

Printed in China

CT3K01(11)

Thank you for purchasing the Nikon COOLPIX L29 digital camera.
Before using the camera, please thoroughly read “Confirming the Package Contents” and “For 
Your Safety” on the reverse side for correct use of the camera. After reading, please keep this 
manual handy and refer to it to enhance your enjoyment of your new camera.
The User’s Manual introduces the procedures necessary in using this camera for the first time.
For more detailed information, please download the “Reference Manual” from the following URL.
http://nikonimglib.com/manual/
The Reference Manual can be viewed using Adobe Reader, available for free download from the 
Adobe website.

•  SD, SDHC, and SDXC memory cards are referred to as “memory cards” in this manual.

•  In this manual, images are sometimes omitted from monitor display samples so that 

monitor indicators can be more clearly shown.

•  Illustrations and monitor content shown in this manual may differ from the actual 

product.

•  For advanced use of the camera, read the Reference Manual (in pdf format) which is 

available in many languages including Hindi, Bengali, Tamil, Marathi and Telugu. See the 
reverse side for information to download the file.

DIGITAL CAMERA