Nikon COOLPIX P340 참조 매뉴얼

Re
cordi

n

g and

 Pl
ay
in

g Back

 Movi

e

s

B

• The zoom indicator is not displayed during movie recording.

• There may be some degradation in image quality when digital zoom is used. If you 

zoom in on the subject while recording a movie, the zoom motion temporarily 
stops at the position where optical zoom is changed to digital zoom.

B

• The camera may become warm when recording movies for an extended period of 

time or when the camera is used in a hot area. 

• If the inside of the camera becomes extremely hot when recording movies, the 

camera will automatically stop recording. The amount of time remaining until the 
camera stops recording (B10s) is displayed. After the camera stops recording, it 
turns itself off. 
Leave the camera off until the inside of the camera has cooled.

• The focus can be adjusted during movie recording in the following manner 

in accordance with the Autofocus mode (

A90) setting of the movie 

menu.
- A Single AF (default setting): The focus is locked when movie 

recording starts. To perform the autofocus function during movie 
recording, press the multi selector 

J.

- B Full-time AF: The focus is adjusted repeatedly even during movie 

recording.

• When the multi selector 

K is pressed during movie recording, the exposure 

is locked. To unlock, press 

K again.

• When the focus mode (

A59) is E (manual focus), adjust the focus 

manually. The focus can be adjusted while recording movies by rotating the 
multi selector counterclockwise to focus on far subjects or clockwise to 
focus on near subjects.

• Autofocus may not perform as expected (

A79). Should this occur, try E 

(manual focus) (

A59, 61) or set Autofocus mode in the movie menu to 

A Single AF (default setting) and then use focus lock (