Nikon SF-210 Slide Feeder Adapter 사용자 설명서
En-16
5. Maintenance
This chapter describes how to clean, store, and transport the SF-210.
5.1 Cleaning
Before cleaning the feeder, remove it from the scanner. The exterior of the feeder is made of
plastic, and should not be cleaned with volatile cleaners such as alcohol or paint thinner. Use a
blower to blow off dust or wipe the surface with a dry cloth. If this is not suffi cient to remove
all dirt, clean with a cloth that has been slightly dampened with a neutral detergent or liquid
soap.
plastic, and should not be cleaned with volatile cleaners such as alcohol or paint thinner. Use a
blower to blow off dust or wipe the surface with a dry cloth. If this is not suffi cient to remove
all dirt, clean with a cloth that has been slightly dampened with a neutral detergent or liquid
soap.
Warning: Do not use water or a volatile liquid such as alcohol, benzine, or thinner.
Should any of these liquids enter the feeder, fi re or electric shock could result. Volatile
chemicals could also stain the plastic exterior of the feeder.
Should any of these liquids enter the feeder, fi re or electric shock could result. Volatile
chemicals could also stain the plastic exterior of the feeder.
5.2 Storage
When you do not plan to use the feeder for an extended period of time, remove it from the
scanner. Store in a dry, well-ventilated en vi ron ment where the temperature is between –10 °C
(14 °F) and +50 °C (+122 °F) and the humidity less than 60%. Do not store the feeder where it
would be subject to sudden temperature changes or condensation.
scanner. Store in a dry, well-ventilated en vi ron ment where the temperature is between –10 °C
(14 °F) and +50 °C (+122 °F) and the humidity less than 60%. Do not store the feeder where it
would be subject to sudden temperature changes or condensation.
5.3 Transport
When transporting the scanner, remove the feeder from the scanner and pack it in the original
packing material.
packing material.