Nikon WT-3A (D200) 사용자 설명서
25
Network Status
The status of the link between the server and the WT-3 is shown by the status LEDs
and by the display in the top level of the wireless transmitter menu.
The status of the link between the server and the WT-3 is shown by the status LEDs
and by the display in the top level of the wireless transmitter menu.
The Status LEDs
The POWER LED lights when the WT-3 is on. Signal qual-
ity is shown by the LINK LED: the faster the LED blinks,
the better the signal and the faster data can be trans-
mitted. The BUSY LED lights while data are being sent.
The POWER LED lights when the WT-3 is on. Signal qual-
ity is shown by the LINK LED: the faster the LED blinks,
the better the signal and the faster data can be trans-
mitted. The BUSY LED lights while data are being sent.
Status
POWER
LINK
BUSY
Camera or exposure meters off , or Off selected for
Wireless transmitter > Wireless LAN system
Wireless transmitter > Wireless LAN system
(off )
(off )
(off )
Connecting to host computer or ftp server
(on)
(on)
(off )
Waiting to send data
(on)
(blinks)
(off )
Sending data
(on)
(blinks)
(on)
Connection error
(blinks)
(off )
(off )
WT-3 hardware malfunction
(blinks)
(blinks)
(blinks)
The Status Display
Network status can also be viewed in the top level of the wireless transmitter
menu.
Network status can also be viewed in the top level of the wireless transmitter
menu.
Status area: The status of the
connection to the host. The
host name is displayed in
green when a connection
is established. While fi les
are being transferred, the
status display shows “Now
sending” followed by the
name of the fi le being sent.
Any errors that occur during
transfer are also displayed
here.
connection to the host. The
host name is displayed in
green when a connection
is established. While fi les
are being transferred, the
status display shows “Now
sending” followed by the
name of the fi le being sent.
Any errors that occur during
transfer are also displayed
here.
,
: The estimated time re-
quired to send the remaining
images.
images.
Signal strength: This icon
shows fi ve levels of wire-
less signal strength. It is
displayed in red when no
signal can be detected. For
maximum signal strength,
ensure a clear line of sight
between the WT-3 antenna
and the wireless LAN adapt-
er or access point. A
shows fi ve levels of wire-
less signal strength. It is
displayed in red when no
signal can be detected. For
maximum signal strength,
ensure a clear line of sight
between the WT-3 antenna
and the wireless LAN adapt-
er or access point. A
icon
is displayed when the WT-3
is connected via Ethernet.
is connected via Ethernet.