Nikon Nikon 1 AW1 참조 매뉴얼
105
O
3
Select Yes.
4
Check satellite signal strength.
5
Take pictures.
The current heading and location will be recorded with each
picture taken. See page 115 for information on viewing loca-
tion data.
The current heading and location will be recorded with each
picture taken. See page 115 for information on viewing loca-
tion data.
Highlight Yes and press
J to enable
the camera’s built-in location data
unit. The camera will begin receiving
location data from navigation satel-
lites.
unit. The camera will begin receiving
location data from navigation satel-
lites.
Press the shutter-release button half-
way to exit the menus and check sat-
ellite signal status in the shooting
info display. Location will only be
recorded if the camera is receiving
signals from at least three satellites.
way to exit the menus and check sat-
ellite signal status in the shooting
info display. Location will only be
recorded if the camera is receiving
signals from at least three satellites.
A
The Satellite Signal Indicator
Signal strength is shown in the information
display as follows:
•
display as follows:
•
#: Location recorded based on data from
four or more satellites.
four or more satellites.
•
$: Location recorded based on data from
three satellites.
three satellites.
•
%: One or two satellites detected; location
not recorded.
not recorded.
•
&: No satellites detected.