Canon XH A1S 지침 매뉴얼
41
Recor
d
ing
Using the ND Filter
When recording under bright conditions, the
camcorder closes down the aperture. When the
aperture value used is too large, the picture may
appear blurred. Turn the built-in ND filter on/off
according to the screen display.
camcorder closes down the aperture. When the
aperture value used is too large, the picture may
appear blurred. Turn the built-in ND filter on/off
according to the screen display.
When using a recording program other than
M Manual and if the AGC switch is set to ON, the following
displays appear:
* If you have no external ND filter available, use the
Tv mode and set a faster shutter speed, or use the Av mode and set
a smaller aperture.
Depending on the scene, the color may change when turning the ND filter on/off. Setting a custom
white balance may be effective in such case (
white balance may be effective in such case (
Screen display
What it means
What you should do
No display
ND filter is not activated
–
“ND”
ND filter is activated
–
“ND
” flashes
ND filter required
Turn on the ND filter
ND “
” flashes
Higher density setting or external ND filter
required.
required.
Set the ND filter to a higher density setting or
attach an external ND filter to the lens*
attach an external ND filter to the lens*
ND “
” flashes
Built-in ND filter not required
Turn off the ND filter
“ND” flashes in red
Incorrect setting of the built-in ND filter
Set the ND filter to an appropriate density
ND FILTER switch
AGC switch
CO
PY