Canon DC22 지침 매뉴얼

 Getting Started

Inserting and Removing a Disc

Inserting the Disc

POINTS TO CHECK

Retract the grip belt under the 
camcorder so it will not get in the way 
of the disc cover.

Insert the disc and press its center 
firmly until it clicks in place.
• Insert the disc with the recording side 
facing down (single sided discs – label 
side facing out).
• Be careful not to touch the recording 
surface of the disc or the pick up lens.

Do not force the cover closed if the 
disc is not correctly inserted and firmly 
set in place.

W

HEN

 

USING

 DVD-R/DVD-R DL 

DISCS

 

You can start recording movies once the 
record pause 

 indication appears.

W

HEN

 

USING

 

A

 DVD-RW 

You need to initialize new discs before 
you can start recording. The disc 
initialization screen will appear when a 
new DVD-RW is first inserted. It will not 
appear when inserting a disc already 
initialized. In that case, you can start 
recording once the record pause 

 

indication appears.

Select (

) the desired disc 

specification and press (

). For a 

comparison between the [VIDEO] and 
[VR] specifications, see An 
Introduction to DVDs  (

6).

You will be asked to confirm the disc 
specification you selected. Select (

) 

[YES] and press (

) to continue, or 

select [NO] and press (

) to return 

and select a different disc 
specification.
A confirmation message will appear 
on the screen. Select (

) [YES] and 

press (

) to start the disc 

initialization.

• The disc initialization will take 
approximately one minute. Avoid 

Use only 8 cm (3 in.) mini DVD discs 
marked with the DVD-R 

 logo 

(including DVD-R DL) or the DVD-RW 

 logo. Refer also to Recommended 

discs  (

8).

Before inserting the disc be sure to check 
that the recording surface is clean. If 
necessary, use a soft lens-cleaning cloth to 
remove any fingerprints, dirt buildup or 
smudges from the disc surface.

(

 

Pick up lens

OPEN

D115_NTSC-E.book  Page 25  Friday, June 9, 2006  5:29 PM