Canon FS10 지침 매뉴얼

Preparations

1 Slide the battery compartment

cover away from the lens and
open it.

2 Press the battery release latch and

pull out the battery pack.

3 Close the cover and slide it toward

the lens until you hear a click.

IMPORTANT

• Turn off the camcorder before

connecting or disconnecting the
compact power adapter. After turning
off the camcorder, important data is
updated in the memory. Be sure to wait
until the

indicator turns off.

• We recommend charging the battery

pack in temperatures between 10 °C
and 30 °C (50 °F and 86 °F). Outside the
temperature range of 0 °C to 40 °C
(32 °F to 104 °F), the charging will not
start.

• Do not connect to the camcorder’s DC

IN terminal or to the compact power
adapter any electrical equipment that is
not expressly recommended for use
with this camcorder.

• To prevent equipment breakdowns and

excessive heating, do not connect the
supplied compact power adapter to

voltage converters for overseas travels
or special power sources such as those
on aircraft and ships, DC-AC inverters,
etc.

NOTES

• If remaining battery time is an issue, you

can power the camcorder using the
compact power adapter so the battery
pack will not be consumed.

• Charged battery packs continue to

discharge naturally. Therefore, charge
them on the day of use, or the day
before, to ensure a full charge.

• We recommend that you prepare battery

packs to last 2 to 3 times longer than
you think you might need.

• U.S.A. and Canada only: The

Lithium ion/polymer battery
that powers the product is
recyclable. Please call
1-800-8-BATTERY for
information on how to recycle
this battery.

Preparing the Wireless Controller and
Accessories

First, insert the supplied lithium button
battery CR2025 into the wireless
controller.

REMOVE

THE

BATTERY

PACK

Battery release latch

Tab