Canon LV-7285 매뉴얼

 Turning off the Projector

To turn off the projector:

3. Projecting an Image (Basic Operation)

1. Press the POWER (

) button on the projector cabinet or the

remote control. The “Push POWER button again to turn off
power. /Carbon savings-Session 23.220(g-CO2)” message
will appear. See page

. Amount of carbon emission reduc-

tion will be displayed only when [Lamp mode] is set to [Quiet].

When [Lamp mode] is set to [Normal], the amount of carbon

emission reduction will be displayed as “00.000 (g-CO2)”.

Power On

Standby

Steady

green light

Steady

orange light

CAUTION:

Parts of the projector will become heated during operation. Use
caution when picking up the projector immediately after it has
been operating.

CAUTION:

• The projector cannot be turned off for 60 seconds after the

lamp is turned on and while the POWER indicator is blinking
green. Doing so could cause premature lamp failure.

2. Press the POWER button again.
The projector turns off and goes into standby mode.
When in standby mode, the POWER indicator will light or-

ange (the cooling fans stop at the same time) and the STA-
TUS indicator will light green.

3. Turn off the Main Power switch. The POWER indicator will go

out.

The projector has a feature called“Direct Power Off”. This

feature  allows  the  projector  to  be  turned  off  (even  when
projecting an image) by using the Main Power Switch or dis-
connecting  the  AC  power  supply.  To  turn  off  the  AC  power
supply  when  the  projector  is  powered  on,  use  the  Main
Power Switch, or a power strip equipped with a switch and a
breaker.

NOTE: Do not turn off the main power within 10 seconds of making adjust-

ment or setting changes and closing the menu.

Doing so can cause loss of adjustments and settings.

BLANK

MENU

POWER

INPUT

IMAGE

ASPECT

INFO.

AUTO PC