Canon LV-7590 지침 매뉴얼

The eight different remote control unit codes (Code 1–Code 8) are assigned to this projector. Switching the 

remote control unit codes prevents interference from other remote control units when several projectors or 

video equipment next to each other are operated at the same time. Change the remote control unit code for the 

projector first before changing that for the remote control unit. See “Remote control” in the Setting Menu on 

page 57.

Press and hold the MENU and a number button (1–8) 

for more than 5 seconds to switch between the codes.

To initialize the remote control code, slide the RESET/ 

ON/ALL

 OFF switch to “RESET,” and then to “ON.” The 

initial code is set to Code 1.

Press and hold the MENU and a number button 
(1–8) that corresponds to the remote control unit 
code for more than 5 seconds to switch between 
the codes.