Canon LV-7590 지침 매뉴얼
32
Operating with Projector Control
The following lens operation can be made with the Lens
button on the side control.
Press the LENS button to enter each lens operation mode.
The selected adjustment display appears on the screen.
Display “Lens shift” on the screen. Use the Point
ed7 8
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 50 percent, or
sideways up to 10 percent from the central axis of the
lens shift.
Lens Shift Adjustment
✔
Note:
• The arrow disappears at the maximum
lens shift in each direction.
• The arrow turns red when the lens
shift comes to the center position of
the screen.
Display “ZOOM” on the screen. Use the Point
ed
buttons to zoom in and out the image.
Zoom Adjustment
Display “FOCUS” on the screen. Use the Point
ed
buttons to adjust focus of the image.
Focus Adjustment
Side Control
Lens Operation
ZOOM
FOCUS
POINT buttons
ZOOM ➜ FOCUS ➜ Lens shift ➜
• • • • •
Basic Operation
Shutter Function
Shutter function allows you to completely block out light
to the screen. Press the SHUTTER button to close the
shutter inside the projector. To open up the shutter, press
the SHUTTER button again. Refer to p.61 for detail of
setting for the Shutter function.
✔
Note:
• The SHUTTER button on the side control and the
remote control unit cannot be effective when
Shutter Protection is "On" in the Setting menu.
(p.61)
• The LAMP/SHUTTER indicator on the projector's top
lights blue when the shutter is closed. (p.15)
• The projector will shut down automatically when
the set time on shutter management has passed.
(p.61)
• The Power management function does not work
when the shutter is closed.(p.58)
SHUTTER button
LENS button