Canon FS100 지침 매뉴얼

External Connections

72

With the software supplied on the 
DIGITAL VIDEO Solution Disk CD-
ROM you can transfer still images to a 
computer simply by pressing 

.

Refer also to the relevant sections in the 
“Digital Video Software” instruction 
manual (PDF file).

Install the software before you connect 
the camcorder to the computer for the 
first time. (Windows users only: you 
also need to select CameraWindow's 
auto-launch setting.) After that, just 
connect the camcorder to the computer 
(steps 2 and 3) and proceed directly to 
transfer the still images (

73).

Refer to the installation guide 
(separate leaflet included with the 
CD-ROM).

/

 Select in advance the 

memory from which you want to 
transfer still images (

57).

• Connection 

. Refer to 

Connection Diagrams (

• If the device type selection screen 

appears, select [PC/PRINTER] and 
press .

• The direct transfer menu appears 

on the camcorder screen and the 

 button lights up.

Windows users only: The first time you 
connect the camcorder to the 
computer, you need also to select the 
CameraWindow auto-launch setting.  

 Refer to Starting 

CameraWindow.

• While the camcorder is connected to the 

computer, do not open the memory card 
slot cover and do not remove the 
memory card.

• Observe the following precautions while 

the ACCESS indicator is on or flashing. 
Failing to do so may result in permanent 
data loss.
- Do not open the memory card slot 

cover.

- Do not disconnect the USB cable.
- Do not turn off the camcorder or the 

computer.

• Operation may not work correctly 

depending on the software and the 
specifications/settings of your 
computer.

• If you wish to use the image files on your 

computer, make copies of them first. 
Use the copied files, retaining the 
originals.

• During the following operations, even if 

you connect the camcorder to the 
computer it will not be recognized.
- Erasing all still images
- Erasing all transfer orders
- Erasing all print orders

(

CO

PY