Canon XC15 매뉴얼
Recording Audio
88
Using the MIC Terminal/Built-in Microphone while the
Microphone Adapter is Attached
Microphone Adapter is Attached
To use an external microphone connected to the MIC terminal or use the
built-in microphone while the supplied microphone adapter is attached to
the camcorder, follow the procedure below to deactivate the INPUT
terminals.
built-in microphone while the supplied microphone adapter is attached to
the camcorder, follow the procedure below to deactivate the INPUT
terminals.
1 Press the MENU button.
2 Open the [INPUT 1/2] submenu.
[¡ Audio Setup] > [1] > [INPUT 1/2]
3 Select [
Off] and then touch [X].
•
will appear on the bottom right of the screen.
• Select [
On] to reactivate the INPUT terminals.
Using the INPUT 1/INPUT 2 Terminals
When the supplied microphone adapter is attached to the camcorder, you can use the INPUT terminals to
record audio independently to two audio channels from a microphone or analog audio input source.
record audio independently to two audio channels from a microphone or analog audio input source.
To select the audio source, set the INPUT 1 or INPUT 2 switch to
LINE or MIC as necessary.
LINE or MIC as necessary.
• To supply a microphone with phantom power, set the switch to
MIC+48V instead. Make sure to connect the microphone first, before
turning the phantom power on. Keep the microphone connected when
turning off the phantom power.
turning the phantom power on. Keep the microphone connected when
turning off the phantom power.
• When using the INPUT terminals to record to only one channel, use the
INPUT 1 terminal.
IMPORTANT
• When connecting a microphone or device that does not support
phantom power, make sure to set the corresponding INPUT switch to
MIC or LINE, respectively. If you set the switch to MIC+48V, the
microphone or device may be damaged.
MIC or LINE, respectively. If you set the switch to MIC+48V, the
microphone or device may be damaged.
[¡ Audio Setup]
[1]
[INPUT 1/2]
[
On]
INPUT 1/
INPUT 2
switches
INPUT 2
switches