Canon Optura 200MC 지침 매뉴얼
![Canon](https://files.manualsbrain.com/attachments/4b6818c07b947b910f8cfb49338c2c63bdefaee1/common/fit/150/50/61ea34cb812b6780fe3b16f0b9221bd2f7635c65cee2473b66396d8b72cd/brand_logo.png)
35
E
Mastering
the Basics
Adjust the speaker volume with the selector dial.
• Pull the selector dial up to increase the volume, and down to lower the
• Pull the selector dial up to increase the volume, and down to lower the
volume.
• A bar appears in the display to indicate the current volume. It disappears in
4 seconds.
• You can turn off the volume completely by pulling the selector dial down
until OFF appears.
Notes:
• Sometimes audio may sound distorted when the volume is turned up high.
If this happens, turn down the volume.
• The speaker does not sound if PHONES is displayed. Set AV/headphones to
AV (
36).
SELECT
The camcorder has a built-in speaker so you can review the sound track
alongside the picture when you’re using the LCD screen to play back. The
built-in speaker is monaural. If you are using the viewfinder to play back, use
headphones to monitor the sound.
alongside the picture when you’re using the LCD screen to play back. The
built-in speaker is monaural. If you are using the viewfinder to play back, use
headphones to monitor the sound.
Built-in Speaker
+
,
+
PLAY
(VCR)
CARD
PLAY
(VCR)
TAPE
Using the Headphones
You can also use the headphones to monitor the sound track. Change the
setting of the AV/headphones terminal through the menu (
setting of the AV/headphones terminal through the menu (
36).
• You can adjust the headphone volume separately from the built-in speaker.
• The levels you adjust for the built-in speaker and headphones are
• The levels you adjust for the built-in speaker and headphones are
memorized separately. The camcorder retains your levels even if you turn
the camcorder off and back on again.
the camcorder off and back on again.
• The speaker turns off when you use headphones.