Canon Optura 200MC 지침 매뉴얼
51
E
Using the Full
Range of Features
To prevent interference from other
Canon wireless controllers being
used nearby, there are 2 remote
sensor modes and an off setting. The
wireless controller and the camcorder
have to be set to the same mode in
order to be compatible.
Canon wireless controllers being
used nearby, there are 2 remote
sensor modes and an off setting. The
wireless controller and the camcorder
have to be set to the same mode in
order to be compatible.
When Operating 2 Canon DV Camcorders (Remote Sensor Mode)
To turn the remote sensor off:
Open the menu and select SYSTEM. Then select WL.REMOTE,
set it to OFF
set it to OFF
B and close the menu.
•
B appears in the display.
To change the mode...
...on the camcorder:
...on the camcorder:
Open the menu and select SYSTEM. Then select WL.REMOTE,
set it to
set it to
A 1 or A 2 and close the menu.
• The selected mode will appear on the display for 4 seconds.
...on the wireless controller:
Press and hold the REMOTE SET button on the wireless
controller.
Simultaneously press the ZOOM W button for mode 1 or the
ZOOM T button for mode 2. Continue to press simultaneously
for over 2 seconds.
controller.
Simultaneously press the ZOOM W button for mode 1 or the
ZOOM T button for mode 2. Continue to press simultaneously
for over 2 seconds.
• Be sure to set the wireless controller to the same mode as the
camcorder.
A 1
: Mode 1
A 2
: Mode 2
OFF
B : Sensor off
WL.REMOTE••• 1
SYSTEM
(
40)
The wireless controller and the camcorder have been preset to mode 1. If
you change the mode on the camcorder, be sure to change the mode on the
wireless controller to the same mode.
you change the mode on the camcorder, be sure to change the mode on the
wireless controller to the same mode.
/
/
REMOTE SET
ZOOM
W
T
+
,
+
,
+
,
+
PLAY
(VCR)
CARD
CAMERA
CARD
PLAY
(VCR)
TAPE
CAMERA
TAPE