Canon Optura 200MC 지침 매뉴얼

To switch to the 16-bit mode, open the menu and select VCR
SET UP. Then select AUDIO MODE, set it to “16 bit” and close
the menu.

• “16 bit” is shown in the display for approximately 4 seconds.

• For details on adding new sound, see p. 101.
• For details of playing back a tape that has new sound on stereo 2, see 

p. 104.

• When you record to the OPTURA200 MC from a camcorder with DV

terminal outputs, the audio mode becomes automatically set to 12 bit.

• In TAPE PLAY (VCR) mode, the audio mode takes effect when doing analog

line-in recording or AV insert. When you do DV in recording, the setting
automatically changes to that of the digital device connected to the
camcorder.

The comcorder can record sound on a tape in two audio modes — 16-bit
and 12-bit. The 16-bit mode produces the higher sound quality (slightly
superior to CD) while the 12-bit mode records on two channels (stereo 1),
leaving two channels free (stereo 2) for you to add new sound later.

(

40)

+

,

+

For greater creative control over audio recording, you can connect an
external microphone to the camcorder via the MIC terminal. When using the
MIC terminal, use a microphone with a built-in power supply (condenser
microphone). It is possible to connect almost any stereo microphone with a
plug diameter of 

1

/

8

inch (3.5 mm), however, their audio levels will be

different from that of the built-in microphone.
Attach the microphone to the optional SA-1 Adapter Bracket.