Canon ZR70MC 지침 매뉴얼

140

Paper cassette is not correctly inserted or is out of paper.

The paper jammed during printing.

The ink cartridge is not inserted or is out of ink.

The printer is experiencing a data transmission error.

You attempted to use the print order settings to print X images 
that were made with another camcorder, have a different format 
or were edited on a computer.

You attempted to print an image that was made with another 
camcorder, has a different format, or was edited on a computer.

You attempted to print an image from the Card Play menu 
[

\ PRINT] without having set the print order.

The printer is printing from a computer or a memory card inserted 
into the printer. It automatically starts printing from the 
camcorder when current prints are complete.

Printer is warming up. The printer automatically starts printing 
when it is ready.

No print head is installed in the printer.

Printer cover is open. Close the printer cover securely.

Wrong paper. Cancel printing and set the paper you chose in the 
print settings menu.

Paper lever error occurred. Adjust the paper selection lever to the 
proper position.

The ink tank needs to be replaced soon. Prepare a new ink tank. If 
you select [Continue] in the error screen, you can restart printing.

Waste tank is full. You can restart printing by pressing the 
RESUME/CANCEL button on the Bubble Jet Printer. Request 
replacement of the waste tank at the shop where you purchased 
the printer or the nearest Canon customer support center listed in 
the Bubble Jet Quick Start Guide.

Turn off the printer and turn it back on. If the error persists, 
consult the nearest Canon customer support center listed in the 
Bubble Jet Quick Start Guide.

No Paper

Paper Jam

No Ink

Communication Error

Could not print X 
images

Cannot Print!

Set print order

Printer in use

Printer warming up

No printhead

Printer cover open

Media type error

Paper lever error

Low ink level

Waste tank full

Printer error