Canon ZR90 지침 매뉴얼

35

When you use the LCD screen for playback, the camcorder plays back the sound via

built-in speaker. The built-in speaker does not sound when you close the LCD panel.

The headphones terminal also serves as AV terminal. Headphones can only be used

when "

H" is displayed on the screen. If not, change the setting following the

procedure below.

H], set it to

H] and close the menu.

❍ The built-in speaker does not sound when “H” is displayed. 
❍ Do not connect headphones unless “H” is displayed as it produces noise.

• A volume bar appears for 2 seconds.

• You can turn off the volume completely by turning the SET dial

down until [OFF] appears. Turn the SET dial up to increase the volume again.

AV

SET dial

Built-in speaker

H (phones) terminal

(

39)