Canon REALiS SX80 지침 매뉴얼

27

Be

fo

re

 Us
e

(1) ANALOG PC-1/DVI-I IN Input Terminal

(

/DVI-I IN) (

)

Connects an external monitor output 
from a computer.
Receives an analog PC (ANALOG 
PC-1) or a digital signal (DIGITAL PC).

(2) HDMI IN Terminal (

)

Receives a digital content image sig-
nal (HDMI).
Carries both video and audio signals 
across a single cable.

(3) ANALOG PC-2/COMPONENT IN Terminal 

(

/COMPONENT  IN)  (

)

Receives an analog PC signal (ANA-
LOG PC-2).
Use a supplied component cable to 
receive a component image signal 
(COMPONENT).

(4) Monitor Output Terminal (MONITOR 

OUT) (

)

Outputs an analog RGB signal to dis-
play an image on an external monitor.

(5) USB Terminal (

Connects a digital camera or an USB 
flash memory. 

(6) S-VIDEO IN Terminal (

)

Receives an S-Video signal from AV 
equipment.

(7) VIDEO IN Terminal (

)

Receives a composite video signal 
from AV equipment.

(8)

AUDIO IN Terminal (

, 

The audio input terminals correspond-
ing to 3 image input systems other 
than HDMI-IN. Each terminal receives 
the audio signal corresponding to "S-
VIDEO or VIDEO", "DIGITAL PC/ANA-
LOG PC-1", and "ANALOG PC-2/
COMPONENT" from the left. The inter-
nal speaker outputs the audio signal 

corresponding to the selected image 
signal.

(9)

AUDIO OUT Terminal (

The audio output terminal to output an 
audio to external AV equipment. It out-
puts the audio signal corresponding 
to the projected image signal.

(10) Service port (CONTROL)

Exclusively used by the service per-
sonnel (it is not used normally).

(11) LAN port (

)

Connects a LAN cable.
Used to connect the projector to the 
network.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)