Canon REALiS SX80 지침 매뉴얼
55
Proje
cti
ng
an
Im
Im
age
Selecting Screen Aspect and Aspect
Select an optimum aspect ratio of the projecting image (screen aspect) or an optimum
screen mode (aspect) according to the aspect ratio of the screen, type of input image
signal and so on for the projection making best use of the screen size.
screen mode (aspect) according to the aspect ratio of the screen, type of input image
signal and so on for the projection making best use of the screen size.
• [Screen aspect]: Select the same aspect ratio as that of the screen in use.
• [Aspect]: Select [Auto] unless the type of input signal is [VIDEO].
• [Aspect]: Select [Auto] unless the type of input signal is [VIDEO].
You may need to change the setting depending on the resolution of the computer. If the
image is not projected with a desired aspect ratio, see "Relationship between Aspect and
Screen Aspect" in Appendix on page
image is not projected with a desired aspect ratio, see "Relationship between Aspect and
Screen Aspect" in Appendix on page
.
Selecting Screen Aspect
Select the aspect ratio of projecting image to the aspect ratio of the screen.
Perform the following steps to select the aspect ratio of the projecting image.
Perform the following steps to select the aspect ratio of the projecting image.
1
Press the MENU button to display a menu window.
2
Use [<] / [>] to select the [Display settings] tab.
3
Select [Screen aspect] with [ ] / [ ], and then press the OK button.
Remote control
Top control
Remote control
Top control
<
<
Remote control
Top control