Canon REALiS WUX5000 D Pro AV 매뉴얼
169
Preparing the Remote Control
Installation Manual
Connecting to a Networ
k
■Windows XP
1
From the PC [Start] menu, select [Control Panel].
2
Select [Network and Internet Connections] and open [Network Connections].
3
Right-click [Local Area Connection], and open [Properties].
4
Select [Internet Protocol (TCP/IP)] and click the [Properties] button. Make a note of
the original network settings (IP address, subnet mask, default gateway, etc).
the original network settings (IP address, subnet mask, default gateway, etc).
5
Select [Use the following IP address] and set the IP address and subnet mask.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
Example
IP address:192.168.254.1
Subnet mask: 255.255.255.0
IP address:192.168.254.1
Subnet mask: 255.255.255.0
6
When the settings are completed, click the [OK] button and then click the [OK] button
on the [Local Area Connection Properties] window to close it.
on the [Local Area Connection Properties] window to close it.