Canon EOS 20D 지침 매뉴얼
150
If there is a problem, first refer to this Troubleshooting Guide.
¡
You are using the wrong battery.
s
Do not recharge any battery pack other than Battery Pack BP-
511A, BP-514, BP-511, or BP-512.
511A, BP-514, BP-511, or BP-512.
¡
The battery is not properly attached to the battery charger.
s
Attach the battery properly to the charger. (p.18)
¡
The battery is exhausted.
s
Recharge the battery. (p.18)
¡
The battery is not installed properly.
s
Install the battery properly. (p.20)
¡
Battery compartment cover is not closed.
s
Close the battery compartment cover tightly. (p.20)
¡
CF card slot cover is not closed.
s
Close the CF card slot cover firmly. (p.24)
¡
If you set the <
4> switch to <2> right after shooting, the
access lamp will still light/blink for a few seconds while the
image is recorded onto the CF card.
image is recorded onto the CF card.
s
When the camera finishes recording the image to the CF card, the
access lamp will stop blinking and the power will turn off
automatically.
access lamp will stop blinking and the power will turn off
automatically.
¡
The battery is not fully charged.
s
Recharge the battery fully. (p.18)
¡
The battery’s service life has expired.
s
Replace the battery with a new one.
Troubleshooting Guide
Power Source
The battery cannot be recharged.
The camera does not operate even when the <
4> switch is set
to <
1> or <J>.
The access lamp blinks even when the <
4> switch is set to <2>.
The battery becomes exhausted quickly.