Canon REALiS WX6000 Pro AV 매뉴얼
Preparing the Remote Control
168
■Windows Vista
1
From the PC [Start] menu, select [Control Panel].
2
Click on [View network status and tasks].
3
From the menu on the left side of the window, click on [Manage network connections].
4
Right-click [Local Area Connection], and open [Properties].
5
Select [Internet Protocol Version 4 (TCP/IP)] and click the [Properties] button. Make a
note of the original network settings (IP address, subnet mask, default gateway, etc).
note of the original network settings (IP address, subnet mask, default gateway, etc).
6
Select [Use the following IP address] and set the IP address and subnet mask.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
Example
IP address:192.168.254.1
Subnet mask: 255.255.255.0
IP address:192.168.254.1
Subnet mask: 255.255.255.0
7
When the settings are completed, click the [OK] button and then click the [OK] button
on the [Local Area Connection Properties] window to close it.
on the [Local Area Connection Properties] window to close it.