Canon EOS-1D Mark II N 지침 매뉴얼

108

h

 Auto Exposure Bracketing

Set the ISO speed that is to be the standard AEB exposure. For example, if you 
want AEB with ±1 stop and ISO 200, 400, and 800, set the ISO speed to 400. 

 

Hold down the <

E

> and <

Q

> 

buttons simultaneously and turn the 
<

5

> dial. 

 

The diagram on the left shows an AEB 
amount of ±1 stop centering on the 
standard exposure level. The AEB 
amount (1.0), the AEB range <

N

>, and 

the <

i

> icon will be displayed. 

 

You can also set it while looking at the 
exposure level indicator in the viewfinder.

 

The shooting operation will be the same 
as AEB shooting while changing the 
shutter speed or aperture. 

 

AEB cannot be used with flash or bulb exposures. 

 

AEB shooting is possible only within the settable shutter speed range (1/
8000 - 30 sec. ), aperture range, and ISO speed range (100 - 1600). It is 
not possible with ISO 50 and 3200 even if the ISO speed extension is [On]. 

 

If you use C.Fn-06-2 to set the exposure setting increment to 1/2 stop, 
AEB shooting with the ISO speed will not be possible. 

 

In the continuous shooting mode, holding down the shutter button will 
take all three bracketed shots continuously, then the shooting will stop 
automatically (except during mirror lockup). 

 

When AEB is used with the self-timer, the three bracketed shots will be 
taken in succession after the 2- or 10-second self-timer delay. 

 

If the drive mode is set to single shooting, press the shutter button three 
times to take the three AEB shots. 

 

AEB can be combined with exposure compensation. 

 

During AEB shooting, the <

w

> icon in the viewfinder and the <

h

> or 

<

g

> icon on the LCD panel will blink.