Canon EOS-1D Mark II N 지침 매뉴얼

165

3

 Custom Function Settings

0: z=S+6  x=S+5
1: z=O+6  x=O+5

This reverses the functions of the <

S

> button and <

O

> button. 

2: z=5 only  x=P+6

 

While exposure metering is active, turn the <

5

> dial to select a 

horizontal AF point. (If C.Fn-13-3 has been set, select a peripheral AF 
point.) This is also possible while you press the shutter button halfway 
and during continuous shooting with AI Servo AF. The AF point selection 
stops at the extreme left, extreme right, top-most, and bottom-most AF 
points. 

 

During autofocusing, you can press the <

S

> button to switch instantly 

to the automatic AF point selection mode. 

 

You can also select the AF point (including automatic AF point selection) 
with the same operation as C.Fn-11-1. 

 

If both C.Fn-11-2 and C.Fn-18-1/2 (p.168) have been set, select a vertical 
AF point by pressing the <

O

> button and turning the <

5

> dial. 

3: z=I+6  x=I+5

This reverses the functions of the <

S

> button and <

I

> button. 

Effective for close-up and telephoto shots to prevent camera shake caused 
by the mirror’s reflex action. See page 111 for the mirror lockup procedure.