Canon EOS-1D Mark II N 지침 매뉴얼

168

3

 Custom Function Settings

0: P+S
1: P

Press the <

P

> button to switch to the registered AF point. 

2: Only while pressing P

Switch to the registered AF point only while you press the <

P

> button. When you 

release the button, the AF point selected previously becomes active again. You can 
thereby easily switch between the selected AF point and registered AF point. 

AF operates only while the AF stop button is pressed. While the button is 
pressed, AF operation with the camera is disabled. 

When the button is pressed while metering is still active, AE lock takes 
effect. Convenient when you want to focus and meter separately. 

3: AF point: M 9 Auto/Auto 9 Ctr.

In the manual AF point selection mode, the button instantly switches to 
automatic AF point selection (among 45 AF points) from manual AF point 
selection only while you hold it down. Convenient when you are no longer 
able to focus track a moving subject with a manually-selected AF point in the 
AI Servo AF mode. In the automatic AF point selection mode, the button 
selects the center AF point only while you hold it down.

4: AF mode: ONE SHOT z AI SERVO

In the One-Shot AF mode, the camera switches to AI Servo AF mode only while you hold 
down the button. In the AI Servo AF mode, the camera switches to One-Shot AF mode 
only while you hold down the button. Convenient when you need to keep switching 
between One-Shot AF and AI Servo AF for a subject which keeps moving and stopping. 

With the lens’ IS switch already ON, the Image Stabilizer operates only while 
you press the button. 

If C.Fn-04-1/3 is also set, you can press the <

P

> button to switch to the 

registered AF point and start the AF at the same time. 

The AF stop button is provided only on IS super telephoto lenses.