Canon EOS-1D Mark II N 지침 매뉴얼

179

If a camera error occurs, <Err xx> will be displayed on the top LCD 
panel. Follow the instruction below to resolve the respective error code. 
If the same error occurs often, something is probably wrong with the 
camera. Jot down the “xx” error code and take your camera to the 
nearest Canon Service Center. 
If an error occurs after you take a picture, the camera might have 
missed the shot. Press the <

V

> button to see if the image 

appears on the LCD monitor. 

Communications between the camera and lens is faulty. 

Clean the lens contacts. (p.11)

There is a problem with the memory card. Try any of the 

following: Remove and re-install the memory card. Format the 

memory card. Use a different memory card. 

Too many folders in the memory card. Replace with a formatted 

memory card. 

The memory card is full. Erase unnecessary images in the card 

or replace the memory card. 

An error other than the above has occurred. 

Remove and reload the battery. 

This error may occur if you use a non-Canon lens and the 

camera or lens does not operate properly.