Canon EOS-1Ds 지침 매뉴얼

161

Reference

P.Fn-30 has not been set in the camera. Use the dedicated software to
set P.Fn-30.

On-screen Messages

Since the CF card is full, a sound recording cannot be made. Erase
unnecessary images from the CF card to make more room. Note that
any erased images cannot be recovered. (

→p.121)

The CF card has not been formatted. The CF card must be formatted
before it can be used. (

→p.126)

There is something wrong with the CF card. Format the CF card or
replace it.

There is no CF card. Insert a CF card into the camera.

You tried to erase a protected image. To erase a protected image, first
cancel the protection. Then erase the image. (

→p.119)

You tried to apply a P.Fn-00 number which has not been registered.
Only a P.Fn-00 number that has been registered can be applied.
(

→p.142)

The CF card has no displayable image. This message also appears if
there is no displayable image while you are setting the “LCD bright-
ness” on the menu. Take a picture or insert a CF card that contains a
displayable image.

You tried to playback an image whose file format is incompatible.
Or you tried to playback an image whose file has been corrupted.

The sound file (WAV) is damaged, or there is a sound file in an
incompatible format.  Use a personal computer to erase unnecessary
sound files.

Message

Description

The CF card could not be formatted. Use a compatible CF card.

P.Fn-30 was OFF. To enable image magnification, turn on P.Fn-30
before shooting.

You tried to enlarge an image which was not taken with the EOS-1Ds.
Or, P.Fn-30 was not ON when the image was taken.