Canon VB-H651V 작동 가이드

124

Four types of frames are displayed for panorama images.

Drag these frames on the panorama screen to set the restrict view area.

(1)

Pan/Tilt Preview Frame (Red Frame)
Displays the vertical and horizontal range the camera can move. You can directly change the restrict view 

area by dragging the pan/tilt preview frame.

If you dragged the pan/tilt preview frame to the outer frame of the panorama area, the view restriction is 

disabled for each edge (there is no restriction).

(2)

Wide-Angle Preview Frame (Green Frame)

Indicates the maximum wide-angle view possible within the pan/tilt preview frame. You can directly change 

the position of the frame by dragging the telephoto preview frame, but the aspect ratio cannot be changed.

(3)

Telephoto Preview Frame (Yellow Frame)
Indicates the maximum telephoto view possible within the wide-angle preview frame. You can directly 

change the position of the frame by dragging the telephoto preview frame, but the aspect ratio cannot be 

changed.

(4)

Preview Frame (Blue Frame)

Indicates the current position displayed in the video display area.

Note

• If the preview frame (blue frame) is positioned outside the pan/tilt preview frame (red frame) you have changed, the camera 

position is moved inside the restricted view.

• If you change the position of the wide-angle/telephoto preview frame, the wide-angle/telephoto end of the preview frame is also 

changed.

The settings are saved to the camera.

Note

• The panorama screen may be slightly different from the actual image. After you have configured view restrictions, be sure to use 

the Camera Viewer to confirm they have been reflected correctly. View restrictions are not applied to the video display area of the 
restrict view setting.

• The controllable range and range that can be captured are as follows.

Click [Apply].

View Restriction Operation Knob (Telephoto)

View Restriction Operation Knob (Wide-angle)

(1)

(2)

(3)

(4)