Canon VB-H651V 작동 가이드
184
Configuring Operations for “Detected” ([Event] Tab)
Set operations to be performed upon detection of changes in a subject.
(1)
Specify Operation Timing (Multiple Selections Possible)
[ON Event Operation]
When selected, the operations set in (2) are performed when the mode becomes “detected”.
[OFF Event Operation]
When selected, the operations set in (2) are performed when “detected” mode ends.
[Detected mode Operation]
When selected, the operations set in (2) are performed while “detected” mode is active.
(2)
Specify Event Operation (Multiple Selections Possible)
[E-mail Notification]
When selected, e-mail notification is sent according to the timing set in (1). [Video Record] > [E-mail Notification] in the
When selected, e-mail notification is sent according to the timing set in (1). [Video Record] > [E-mail Notification] in the
Setting Page must be set in advance (P. 155).
[Video Record]
When selected, video recording begins according to the timing specified in (1). [Video Record] > [Upload] or [Memory
Card] > [Video Record Setting] in the Setting Page must be set in advance (P. 151).
(3)
Specify Audio Playback Timing
[Audio Playback at ON Event]
When selected, the sound clip specified in (4) is played back when the mode becomes “detected”.
[Audio Playback at OFF Event]
When selected, the sound clip specified in (4) is played back when “detected” mode ends.
(4)
Sound Clip Settings
[Sound Clip Name]
Select the sound clip to be played back. You must register the sound clip with [Video and Audio] > [Audio] > [Sound
Clip Upload] (P. 143) on the Setting Page in advance.
[Volume]
Set the volume for the sound clip.
Set the volume for the sound clip.
(5)
External Device Output Operations
[External Device Output for ON Event]
Select this to start or pause output to an external device when the mode becomes “detected”, and to select the output
destination (output 1 or 2) and operation (active or inactive).
[External Device Output for OFF Event]
Select this to start or pause output to an external device when “detected” mode ends, and to select the output
Select this to start or pause output to an external device when “detected” mode ends, and to select the output
destination (output 1 or 2) and operation (active or inactive).
(1)
(3)
(4)
(5)
(2)