Canon VB-R13 매뉴얼
136
Note
When [Night Mode] is enabled in [Aperture Mode], video will be black and white.
(6)
[Infrared]
Specify whether or not to use infrared lighting during night mode. Cameras without the infrared lighting feature will
Specify whether or not to use infrared lighting during night mode. Cameras without the infrared lighting feature will
always be set to [Not Supported].
[Off]: Record with infrared lighting disabled.
[Day/Night Operation]: Use infrared lighting together with night mode. Infrared lighting will be irradiated during night
mode.
[1] to [5]: Select one of five strength levels for the infrared lighting used during night mode when [Exposure] is set to
[Manual].
(7)
[White Balance]
Specify the appropriate white balance by selecting one of the camera’s light source settings displayed in the list.
If [Manual] is selected, use one of the following two methods to adjust the white balance.
• [R Gain] and [B Gain]
Specify the white balance parameters by dragging the sliders. Drag to the right to increase the gain (the sensitivity
to brightness).
• [One Shot WB]
Force white balance adjustment to a light source. Using a white object (such as a piece of white paper) as a
standard, fill the shot with the object and click this button.
Important
When [Clear IR Mode] is set to [On], [Night Mode] cannot be specified.
Important
When [Clear IR Mode] is set to [On], [Infrared] cannot be specified.
Important
When [Clear IR Mode] is set to [On] or when [Night Mode] is set to [Enabled], the white balance cannot be specified. If you select [Auto]
for Night Mode, however, you will be able to set the white balance, but those settings will be cleared when the camera switches to Night
Mode.
for Night Mode, however, you will be able to set the white balance, but those settings will be cleared when the camera switches to Night
Mode.