Canon VB-H651V 매뉴얼

130

(1)

[Sequence Name]
Enter the name of layout sequence.

(2)

[Type]
Specify the type of layout sequence.

(3)

[Available Layouts]
Displays a list of available layouts.

(4)

[Add Layout]
Add the selected layout to the [Sequence Layouts] list.

(5)

[Move Up] and [Move Down]
Move the selected layout up or down in the list to change the sequence order.

(6)

[Remove Layout]
Remove a layout from the list.

(7)

[Sequence Layouts]
Displays a list of layouts in the order of the layout sequence.

You can set the display time for each layout in [Interval (sec)].

(8)

[Interval]

When a layout is added to a sequence, the set display time will be added here. The display time can be 

changed after being added to [Sequence Layouts]. Specify from 5 to 9999 (sec.).

Resume Layout Sequence

In the following situations, the layout sequence automatically stops.

• When you click the layout area

• When you obtain camera control privileges

• When you click [Grids] on the toolbar and select a grid type from the displayed menu

• When you open a menu on the menu bar

• When you switch to another tab or open a new tab

• When a layout property is canceled, e.g., because it was deleted by a Viewer on another computer

When stopped, “Paused” appears in the title bar as shown below.

To resume a stopped layout sequence, click [Layouts] menu > [Resume Layout Sequence].

During full screen display, right-click anywhere in the viewing area outside the video windows and click [Resume 

Layout Sequence], or press Ctrl+R to resume the sequence.

Click [OK] to close the dialog box.