Canon XF100 매뉴얼
59
Adjusting the Aperture
Adjusting the Aperture
You can affect the brightness of your recordings or change the depth of field by adjusting the aperture. Increase
the aperture value (F8) so that objects that are close and far away will be in focus. You can have the camcorder
adjust the aperture automatically or you can manually adjust it to give you more control over your recording.
the aperture value (F8) so that objects that are close and far away will be in focus. You can have the camcorder
adjust the aperture automatically or you can manually adjust it to give you more control over your recording.
Automatic Aperture Control
The camcorder automatically adjusts the aperture based on the brightness
of the subject. If manual aperture control is activated, follow the procedure
below to activate automatic aperture control.
of the subject. If manual aperture control is activated, follow the procedure
below to activate automatic aperture control.
Press the IRIS button.
• The A icon appears next to the aperture value on the screen.
• When you set the camcorder to full auto mode (0 42), the camcorder
automatically controls the aperture.
Manual Aperture Control
When automatic aperture control is not activated, follow the procedure
below to adjust the aperture manually.
below to adjust the aperture manually.
1 Move the manual ring switch to IRIS(ND).
• Alternatively, you can use the CUSTOM dial to manually adjust the
aperture (0 47).
2 Turn the manual ring to adjust the aperture.
• The f-number displayed on the screen will be in 1/4-stop increments.
Available aperture settings
* Can be selected only when the [J Other Functions]
[Custom Function]
[Iris Limit] setting is set to [Off].
NOTES
• If you set [l Camera Setup]
[ND Filter] to [Automatic], the ND filter will activate automatically depending
on the recording conditions.
• When the gain and aperture are set to manual and the shutter speed is not set to auto, the exposure bar will
appear on the screen (0 55).
• You can use the [J Other Functions]
[Custom Function]
[Iris Limit] setting (0 108) to prevent the
aperture from closing below the diffraction limit of the lens (F8.0). When it is on, the maximum aperture value is
[F8.0]. When it is off, you can fully close the aperture but aperture values that exceed the diffraction limit will
appear in gray. Using aperture values displayed in gray will cause diffraction blur.
[F8.0]. When it is off, you can fully close the aperture but aperture values that exceed the diffraction limit will
appear in gray. Using aperture values displayed in gray will cause diffraction blur.
Operating modes:
F1.8
F2.0
F2.2
F2.4
F2.6
F2.8
F3.2
F3.4
F3.7
F4.0
F4.4
F4.8
F5.2
F5.6
F6.2
F6.7
F7.3
F8.0
F8.7*
F9.5*
F10*
F11*
F12*
F14*
F15*
F16*
F17*
F19*
F21*
F22*
CLOSE*
COP
Y