Canon VB-R13VE 매뉴얼

136

Note

When [Night Mode] is enabled in [Aperture Mode], video will be black and white.

(6)

[Infrared]
Specify whether or not to use infrared lighting during night mode. Cameras without the infrared lighting feature will 

always be set to [Not Supported].

[Off]: Record with infrared lighting disabled.

[Day/Night Operation]: Use infrared lighting together with night mode. Infrared lighting will be irradiated during night 

mode.

[1] to [5]: Select one of five strength levels for the infrared lighting used during night mode when [Exposure] is set to 

[Manual].

(7)

[White Balance]

Specify the appropriate white balance by selecting one of the camera’s light source settings displayed in the list.

If [Manual] is selected, use one of the following two methods to adjust the white balance.

• [R Gain] and [B Gain]

Specify the white balance parameters by dragging the sliders. Drag to the right to increase the gain (the sensitivity 

to brightness).

• [One  Shot  WB]

Force white balance adjustment to a light source. Using a white object (such as a piece of white paper) as a 

standard, fill the shot with the object and click this button.

Important

When [Clear IR Mode] is set to [On], [Night Mode] cannot be specified.

Important

When [Clear IR Mode] is set to [On], [Infrared] cannot be specified.

Important

When [Clear IR Mode] is set to [On] or when [Night Mode] is set to [Enabled], the white balance cannot be specified. If you select [Auto] 
for Night Mode, however, you will be able to set the white balance, but those settings will be cleared when the camera switches to Night 
Mode.