Canon VB-R13VE 매뉴얼
S
etting a R
ecording
S
che
dule
5
87
Selecting [Return to default focus when the camera is operated] enables you to restore the focus settings to the
default (“Auto”) during the preset tour.
The tour starts with the first preset and proceeds down the list. Change the order by selecting a preset,
and then clicking [Move Up] or [Move Down].
To remove a preset, select the preset and click [Remove]. To edit a preset in the list, select the preset and click
[Edit].
Note
• The camera returns to the first preset position after reaching the last preset position.
• Click [Start Test] to run through the preset tour once to confirm your settings.
About the Warning Message Displayed During the Preset Tour
Depending on the preset tour settings, a warning message about the camera’s pan/tilt mechanism may be displayed
when you click [OK] to close the [Preset Tour Settings] dialog box. If this happens, consider changing the settings.
A warning will appear when the pan/tilt mechanisms reach their estimated lifetime of 100,000 round trips over the full
range of motion.
Specify the Option for Recording Before and/or After an Event
You can record a number of seconds before and/or after an event, such as sensor input or Intelligent Function, using
the [Recording Options] setting.
(1)
[sec. before event]
Number of seconds to record before an event (max. 30 seconds).
(2)
[sec. after event]
Number of seconds to record after an event (max. 999 seconds).
Note
• [Recording Options] cannot be specified when setting continuous recording.
6
Repeat steps 2 to 5 for additional presets.
7
Specify the order of the presets.
8
Click [OK] to close the dialog box.
Important
• Using preset tour with MPEG-4 or H.264 format will consume a large amount of disk space.
• The preset tour settings can effect the durability of the camera’s pan/tilt mechanism.
(1)
(2)