Canon Wireless File Transmitter WFT-E7A 매뉴얼

14

When connecting the transmitter to the camera, always use one of the interface cables 
included with the transmitter.

Attach the transmitter’s <a> port 
cap.

 

To keep the cable securely connected, attach the 
cap to the transmitter.

 

See “Example of Attachment” on the next page.

X

The transmitter’s <3> lamp will light and 
<D> will be displayed on the transmitter’s LCD 
panel.

 

When connecting the transmitter to a camera equipped with a micro USB 3.0 (Micro-B) terminal, 
use the cable protector provided with the camera. For the interface cable, use either IFC-40AB II or 
IFC-150AB II.

 

Before disconnecting the cable, turn off both the transmitter and camera.

 

If you turn on/off the transmitter or connect/disconnect the interface cable during Live View 
shooting or movie shooting, Live View shooting or movie shooting will stop.

 

Using the USB 3.0 cable will not result in faster transfer over wired or wireless LANs.

If the transmitter’s <3> lamp blinks, it means that the transmitter and camera are not properly 
connected. Check the connection.